Communication and Marking

Communication is top priority whether you're a rifleman or a platoon leader. Remember, during a session, if you're not shooting or moving, you should be communicating.

Radio Communication

Through our radio system (ACRE2), we use a full-duplex system which allows multiple people with different radios to talk on the same channel at the same time. This means we have to practice certain protocols to ensure information flows up and down the chain of command properly.

Radio Channels/Nets

All radio nets are listed at the map briefing screen. However, you can also find a list of them here. All fireteams have their own private PRC-343 ("walkie-talkie") while communication between assets, squads, and the platoon all happen on different long-range radios such as the PRC-152, PRC-148, and the PRC-117F.

Short-Range PRC-343 Channels:

CH1 - Alpha 1 
CH2 - Alpha 2  
CH3 - Alpha 3 
CH4 - Bravo 1 
CH5 - Bravo 2 
CH6 - Bravo 3
CH7 - Charlie 1
CH8 - Charlie 2
CH9 - Charlie 3
CH10 - Inter-Armor
CH11 - Inter-Air
CH12 - Inter-Platoon

Long-Range PRC-152/148/117F Channels:

CH1 - Alpha Net
CH2 - Bravo Net
CH3 - Charlie Net
CH4 - Platoon Net
CH5 - Air Net
CH6 - Armor Net
CH7 - Emergency Net

Radio Brevity

Brevity is the ability to transmit your message with utmost accuracy as quickly as possible. An example:

Scenario: You are Alpha 1 Fireteam Leader and you see enemies in front of your team, but they're not aware of your presence.

Rather than a message such as:

Alpha Squad Lead, this is Alpha 1, we uh, see about a squad size or even maybe two squads of infantry in the open over here and we need to know if we should shoot them or wait. So far, I don't think they uh, have noticed us and we're prone on the hill here.

A proper message with brevity would be:

ASL, this is A1, we have an EI squad soft contact 300 meters from us at the treeline north. Check map for "EI" mark.

Direct Communication

Direct communication is any communication done between two or more players in real time. Direct communication is a skill that must be developed in order to relay information between fireteam members more efficiently and ultimately increase surviveability.

Contact Calls

A contact is anything unknown that you're able to visually or audibly identify as being present. A contact is not specifically an enemy vehicle or infantry, so make sure you always identify prior in order to avoid friendly fire incidents. Examples of contact calls:

I got audio on something tracked to the north in the treeline. Unknown distance

Contact, infantry moving in the trees to the southwest, 300 meters.

Marking

Marking is any visual form of identification across one or more mediums. This includes marks on the global map, spray painting doors after buildings have been cleared, or even lasing targets with a laser designator.

Map Types

There are two map types: Textured and Un-textured. The map type can be toggled at the top right of the map screen. It is recommended that you use un-textured for clarity of terrain and markings.

Textured

Un-Textured

Map Marking

There are two kinds of map marking: Icons and Drawn Lines. Every mark on the map must be color-coded based on who the mark is for. There are also specific techniques that platoon and squad leaders must use when developing plans.

Marking Color Code

Alpha - Red
Bravo - Blue
Charlie - Green
Individual Specialties (MMG, MTR, MAT) - Purple
Command - Yellow
Armor - Orange
Everyone - Black

Prior to mission start, you can set your marker color at the top right of the map screen. This should be down by everyone while safe start is on.

Icons

Icons are used for specific points such as dismounting, convoy start points, or even mortar/air strike requests. Icon example:

Drawn Lines

Lines are used to draw movement plans, areas of operation, or even specific blocking orders. Line example:

EI Map Marks

EI: Enemy Infantry

Every "EI call" must be marked on the map once they are pointed out. This allows for direct identification on all levels of command based on color-coded marks. As an example, if it's a green "ei" mark, then charlie has obviously spotted and called out enemy infantry. Alternatively, if it was blue, bravo has spotted them.

In this example, Alpha has marked spotted EI at the top of hill 100:

Command Map Planning

Regardless of who is in command at the time of mission start, all mission commanders need to follow the same type of planning system. This ensures that all players have a streamlined and structured experience without the need to adapt to different leadership styles as a whole. Failure to do so will result in commanding rights being revoked. The following are examples of full plans.

Convoy

Also note that ALL convoy planned-missions must have a Mount Order defined prior to mission start. A stand MO looks like this:

Infantry

Full Plans

Convoy with Infantry Dismount/Assault

Calls for Fire

Calls for fire will always be directed by a Joint Terminal Attack Controller(JTAC)/Forward Observer(FO) if available. If not, all leadership can request support through their chain of command. Only the highest level leader may contact the supports directly for fire if there is no JTAC/FO available.

Mortar Support Marking

Air Support Marking

All airstrike requests MUST have an IP (Initial Point) and a "strike" mark as an "X". If there is multiple air defense threats, the requester can also mark an egress point for safety, but it is not required. All related-points must have the same identifier. In this screenshot, the identifier is "ROMEO". This means IP Romeo, AS Romeo, and EP Romeo would all be the same strike package.