Machine Gun Team

Overview

Is exploiting the suppression mechanic your favorite activity? Do you appreciate the fine art of swiss cheesing light vehicles? Do you crave overwhelming amounts of DAKKA?! Then operating a machine gun may be your calling!

Be it a basic Auto-rifleman, or a full blown emplaced or turret mounted Heavy Machine Gun. The same basic principles apply!

Automatic Rifleman Buddy Team

• The Automatic rifleman himself is the second in command of his fireteam. He coordinates with his FTL to position himself and his assistant in an effective way for the given objective.
• The AAR - Assistant Automatic rifleman carries extra ammo, builds trenches to house the gun, clears grass and brush to open up sightlines, and uses his binoculars to guide the gunner's fire on target.

AR Buddy Team Equipment

In addition to the standard GI loadout such as radios and bandages, The AR Buddy team is outfitted with the following specialized equipment to assist them in their role:

Automatic Rifleman

• Squad Automatic Rifle System (Ig. RPK, M249)
  • Bipod if weapon supports it
  • Non magnified optic if supplied
• Sidearm

Assistant Auto-rifleman

• Standard Rifle/Carbine
  • Non magnified optic if supplied.
• Entrenchment tool
• Binoculars
• Extra Ammo for the Automatic rifle.

MMG/HMG Roles

• The Team Leader/Commander coordinates at the Squad and Platoon level to acquire movement and targeting information, which is then passed along to the rest of the team.
• The Gunner operates the primary weapon system, managing ammunition consumption and weapon function.
• The Assistant builds fortifications to house the weapon system and gunner, supplies ammunition as needed and provides area security.

MMG/HMG Equipment

In addition to the standard GI loadout such as radios and bandages, the machine gun team is outfitted with the following specialized equipment to assist them in their role:

Team Lead/Commander

• Squad and/or Platoon-level Radios
• Binoculars

Gunner

• Primary Weapon System
  • Magnified optic if supplied (Ig. Elcan)
  • Packed in backpack for HMG platforms

Assistant/Loader

• Primary Weapon Ammunition
• Binoculars
• Entrenchment Tool
• Weapon Bipod (If fielding a HMG platform)

MMG/HMG Operation

• Command will establish a location for the team to set up, along with desired firing arcs.
• The Gunner and Assistant will establish a base of fire and fortifications within the specified area of operation, utilizing their best judgement of the locale to pick the exact spot.
• The Commander and/or Assistant will provide range estimates of various landmarks within the arc of fire to the Gunner.
• The Gunner will set the weapon's zero to the appropriate setting for the distance and prepare to acquire targets.
• The Commander will select targets for the Gunner in preparation of combat.
• The Assistant will take up a security position to protect the nest's flanks.
• The Commander will specify a firing rate and issue the command to begin firing.
  • Sustained Fire Rate is the standard rate for the weapon, generally consisting of 2-3 round bursts with a 1-2 second delay between for damage assessment and retargeting.
  • Rapid Fire Rate is specified during emergency/final defensive line situations, consisting of 5-10 round bursts with a 1-2 second delay between for retargeting.
  • Cyclic Fire Rate is rarely utilized due to heat/ammunition requirements to maintain, and consists of sustained firing of the weapon with little to no delay between bursts.
• The Gunner will begin firing at specified targets or targets of opportunity within the designated zone.
• The Commander will issue corrections of distance and angle to improve effectiveness.

Basic Machine Gunner Marksmanship Principles

The most basic principles of handling a machinegun. Limited to what can be used in Arma.

Characteristics of fire

You can use the characteristics of your weapon's fire to your advantage.

These involve things like your bullet trajectory and the spread over range

Cone of fire And Beaten Zone

There are two ways you need to think about the spread pattern from your weapon.

Cone of Fire: When several rounds are fired in a burst from any machine gun, each round takes a slightly different trajectory. The pattern these rounds form on the way to the target is called a cone of fire. This pattern is caused primarily by vibration of the machine gun and variations in ammunition and atmospheric conditions. This is how your rounds will impact on a horizontal plane, say for example a barn door at 300m on level ground.

It is important to take your cone of fire into account when engaging targets. You can sometimes deny an entire bunker from returning fire by relying on your cone of fire instead of shifting your point of aim.

Beaten zone The beaten zone is the elliptical pattern formed by the rounds striking the ground or the target. The size and shape of the beaten zone changes when the range to the target changes or when the machine gun is fired on different types of terrain. On uniformly sloping or level terrain, the beaten zone is long and narrow. As the range to the target increases, the beaten zone becomes shorter and wider. When fire is delivered on terrain sloping down and away from the machine gun, the beaten zone becomes longer. When fire is delivered on rising terrain, the beaten zone becomes shorter. The terrain has little effect on the width of the beaten zone.

You can use your beaten zone to your advantage to suppress a large area without shifting your point of aim. If you are in a defensive position, you can also chart your rough beaten zone on a range card for each reference target. Knowing your beaten zone can even let you fire out of defilade onto a target you cannot see with the aid of an observer.

Danger Space

The danger space is the space between the machine gun and the target where the trajectory does not rise above 1.8 meters (the average height of a standing soldier). This space includes the area of the beaten zone. When the machine gun is fired on level or uniformly sloping terrain at a target less than 700 meters away, the trajectory does not rise above the average height of a standing soldier. When targets are engaged on level or uniformly sloping terrain at ranges greater than 700 meters, the trajectory rises above the average height of a standing soldier, therefore, not all the distance between the machine gun and the target is danger space.

They probably had to change this to "space" to avoid all the danger zone jokes huh?

Why is the Danger space important you ask? Well it sets you up to understand the next principles of fire!

Classes of fire

There are 3 classes of fire. Fire in relation to the ground, In relation to the target, and In relation to the gun.

Understanding these will help you position your gun for the desired effect.

Grazing and Plunging fire

These are fire methods in relation to the ground.

Grazing fire

Grazing fire occurs when the center of the cone of fire does not rise more than 1 meter above the ground. When firing on level or uniformly sloping terrain, the gunner can obtain a maximum of 600 meters of grazing fire. With grazing fire you are able to use both your cone of fire and your beaten zone.

Plunging Fire

Plunging fire occurs when the danger space is confined to the beaten zone. Plunging fire also occurs when firing at long ranges, from high ground to low ground, into abruptly rising ground, or across uneven terrain, resulting in a loss of grazing fire at any point along the trajectory.

In Relation To the Enemy

---

Frontal Fire

The beaten zone is at a right angle to the target. You are firing directly into their front.

Flanking Fire

You are firing at the side of the enemy.

Oblique fire

Is when the long axis of the beaten zone is at an angle other than a right angle to the front of the target

Enfilade fire

Is when the long axis of the beaten zone coincides or nearly coincides with the long axis of the target. This type of fire is either frontal or flanking. It is the most desirable type of fire with respect to a target, because it makes maximum use of the beaten zone. And typically gives you the most time on target.

In Relation To the Gun

Fixed Fire

Fixed fire is fire delivered against a point target when the depth and width of the beaten zone covers the target. Fixed fire also means only one aiming point is necessary to provide coverage of the target.

Traversing Fire

Traversing fire is fire distributed in width by successive changes in direction. The gunner selects successive aiming points throughout the width of the target. These aiming points must be close enough to ensure adequate coverage but not so close as to waste ammunition.

Searching Fire

Searching fire is fire distributed in depth by successive changes in elevation. The gunner selects successive aiming points in depth. The changes made in each aiming point will depend on the range and slope of the ground.

Traversing and Searching Fire

Traversing and searching fire is fire distributed in width and depth by successive changes in direction and elevation. Combining traversing and searching provides good coverage of the target. Adjustments are made in the same manner as described for traversing and searching fire.

Application of fire

Believe it or not, there's more to machinegunning than holding down mouse 1.

How you apply your fire can have drastic results on the enemy! You as a gunner along with your teamleader should keep these principles in mind when setting up your lanes of fire!

Distribution and Concentration

These principles should be combined with a rate of fire for best effect.

Distributed fire:

Is delivered in width and depth, such as when engaging fortifications or other large stationary targets. Use this much like setting the spread for an artillery strike. Give your gunner fields of fire based on references. "Start at the north most side of the hescos, and walk your fire back and forth between there and the bunker to the south"

This is very useful to allow a friendlies to bound while the Machine-gunner keeps the enemy's heads down in a wide area.

Concentrated fire:

Is delivered as point fire. Use this to engage specific threats such as an enemy machinegun or a specific bunker. "Engage the bunker at bearing 246, sustained fire until I call cease"

Rates of fire

Your rate of fire is important to balance to ensure you do not burn through your ammo or overheat your gun too quickly while still keeping the enemy's heads down.

Your team leader should be giving you an idea of what type of fire he wants you laying down.

Sustained fire

This should be your default rate of fire for any machine gun. and works out to around 85-100 rounds per minute.

Sustained fire is achieved by firing in short controlled burst of 3-5 rounds, then waiting 3-5 seconds before firing another burst. This method will prevent overheating, and conserve ammo.

Slower firing weapon systems such as the M2 or m240 can aim for 6-8 round burst to achieve roughly the same 85-100 rounds per minute.

Rapid Fire

Rapid fire bumps the average rounds per minute up to around 200 by firing longer burst of 8-12 rounds and pausing for 2-3 seconds between burst.

This raises the volume of fire significantly. You may easily overheat your weapon if you attempt to use rapid fire for too long.

Cyclic Fire

Like all things in nature, a machinegunner does indeed have a distress call.

Cyclic fire is simply letting the weapon run in its full glory. You will eat belts and overheat the gun to the point you have to worry about it cooking off. Emergency use only.

Mutual Support AKA Talking Guns

When two Machineguns can see the same target, you can ensure there will always be fire on the target by "talking" the guns. This simply means if one gun is not shooting the other picks up fire.

For example. If the goal is to keep a bunker suppressed, Gun 1 will fire a 3-5 round burst, and pause for 3-5 seconds. Gun 2 will fire during Gun 1's pause. Thus it sounds like the guns are "talking"

Weapon Sight Profiles

(Common MG optic guides to be added. For example the Elcan.)